Visit my fb page https://www.facebook.com/blackandamberdrivingschool
Road position on the straight - The correct road position is less than one meter from the left hand side of the road (kerb or hard shoulder)
Road Position turning left from a two way street - Keep within a meter from your left both on approach and during your turn. Remember not to swing wide. The same applies when turning left from a one way street. Always indicate to other road users in good time what you’re doing before you do it
Road Position tuning right from a two way street - Do your mirror, signal and blindspot routine. Move over towards the center line on the road staying close to it without crossing it. If there is no center line painted on the road, imagine where the line would be. When you have assessed a safe time to commit to turning right, drive forward until the front of your vehicle is at the center of the road you are turning into. This is the point to start to turn as it will line you up perfectly to be within a meter of the kerb or road side. Always look into the road you are turning into before you drive forward into the junction. Remember not to over shoot the turn which is known as a swan neck.
Road Position turning right from a one way street - Do your mirror, signal and blindspot routine. Move over towards the right hand side of the road and from this point carry out the same procedure as you would when turning into another road from a two way street.
Road Position in traffic lanes - stay in the center of your lane.
