Friday, 1 June 2012


Visit my fb page  https://www.facebook.com/blackandamberdrivingschool

Motorway Driving
As with all my BlogSpots my tips do not cover every detail on the topic just the basics.  For example with this Blog I do not mention tunnels, toll plazas, breakdowns etc.


Who can not drive on the Motorway? 
L Drivers, vehicles that are slow and cannot exceed 50 km/h, vehicles under 50 cc, cyclists, pedestrians, invalid carriages – motorised wheelchairs and animals.


Is your vehicle fit for the motorway?
Check your fuel, water and coolant level.  Check tyre pressure and be sure that your vehicle is capable of doing the motorway speed.  Contrary to popular belief extra tyre pressure is not needed to drive on the motorway.


Plan your route.
Get your map out and find out what your route numbers are.  Find the the location of rest areas, service areas and lay-bys along your journey.  At the bottom of all maps there is a box which is called the Map Key.  This will let you know what each symbol means on the map.   For example, P = lay-bys (lay-bys will not have any facilities other than to park up safely), A blue line = Motorway, A green line = Dual carriageway etc.


What is the speed limit on the motorway?
120 km/h unless road markings or road signage state otherwise.


Joining the Motorway.




Entry to Motorway






Give way to traffic already on the motorway.  Make sure you build up your speed sufficiently while driving in the acceleration lane before you merge with the motorway traffic.  Signal right letting other traffic know of your intentions. 

The continuation of the acceleration lane is called a slip road/merging lane which is separated from the motorway by hatched markings (painted markings which separate traffic lanes)  Avoid crossing the continuous white line to merge with the motorway traffic.  Do mirror and blind spot checks as you look for a suitable gap to join the other traffic.


Once you are on the motorway
Continue driving straight ahead and never reverse or do a U turn.  Do not stop on the hard shoulder unless in the case of an emergency, directed by a guard or directed by emergency services.


What lane should I be in?
Lane 1 – (inside or left lane)  This is where you should always drive unless you are overtaking

Lane 2 – (centre lane)  Use this lane when overtaking.  Also it makes for safer driving if you can enter this lane safely when approaching a slip road where traffic will be merging from your left to join the motorway.

Lane 3 – (outside or right lane)  This lane should only be used if Lane 1 & 2 are moving queues and you need to overtake making room for merging traffic.

Always make your way back to Lane 1 allowing faster traffic from behind to overtake.


Reading the information signs on route along the motorway
Along the way you will see Motorway INFORMATION  SIGNS (blue rectangular signs with white letters) 

On these signs you will be given the number of the next exit (black square with white number) this is placed on the top left corner of the information sign.

The next piece of information on the sign is the number of the diverging lane.  This number will have an R before it for example R316

Another piece of information it gives is the number of the stretch of motorway ahead.  This number will always have the letter M before it.  For example M9


Leaving the motorway.
Know what exit you want to take.  If you pass your exit accidently continue on to the next exit.  On approach to your exit you will see three countdown markers. 



300 metres  -  200 metres  -  100 metres to next exit





Signal left but it is very important that you DO NOT reduce speed until you are in the deceleration lane as this would put following traffic in great danger.  Once in this lane reduce speed and look out for the new speed limit.






End of Motorway








NOTE:
Signals, mirrors and blind spots must be checked when lane changing as you would do with any change in direction.  Be alert and read the road well ahead.